Instructions for Use

1) Clean teeth with plain pumice using a rotating bristle brush or rubber cup.

2) Rinse and air-dry.

3) Etch for 20 seconds using Sure Ortho Etch or any other 36-38% phosphoric acid etching gel. Rinse and air-dry.

4) Isolate the bonded surfaces.

5) Position retainer on teeth and syringe the Light Cure Retainer cement, directly onto the splint and adjacent teeth surfaces.

6) Final retainer adjustment must be made before the cement begins to cure from the ambient light, approximately 60 seconds.

7) Sure Ortho Light Cure Retainer can be easily wiped away with a cotton roll before it starts setting or removed with a scaler after it has set. The strong orange color of the un-cured cement helps to identify access material.

8) Light cure each bonded tooth surface for 20 seconds. (Cure only for 10 seconds with high intensity lights).

9) After Light curing, the photo chromatic Sure Ortho Light Cure Retainer will change it's color from orange to white. This serves as an indicator for complete polymerization of the cement.

10) Keep teeth isolated for 3 min after last bond.

Properties

Easy bonding of retainer to tooth surface.

Photo chromatic technology. After light curing, Sure Ortho Light Cure Retainer changes its color from orange to white.

Releases Fluoride.

Contains the adhesive promoter 4-Meta, for strong reliable chemical bonding with tooth, metal and porcelain surfaces.

Precautions

Refrigeration will increase viscosity, making syringing more difficult, and will retard setting time.

Contains polymerizable monomers which may cause allergic contact dermatitis in susceptible persons. Wash thoroughly with soap and water after contact. If skin sensitization occurs, or if known allergy to methacrylate resin exists, discontinue use.

Storage

Do not expose to temperature exceeding 24ºC/75ºF.

Do not expose to direct sunlight.

Refrigerate for maximum shelf life. Do not freeze.

Shelf life is 24 months from date of manufacture.