Instructions for Use

1) Clean teeth with plain pumice using a rotating bristle brush or rubber cup.

2) Rinse and air-dry.

3) Etch for 20 seconds using Sure Ortho Etch or any other 36-38% phosphoric acid etching gel. Rinse and air-dry.

4) Isolate the bonded surfaces.

5) Apply a thin uniform layer of Sure Ortho Light Bond Sealant on the etched enamel surface and light cure for 20 seconds. Gently spread the Sealant by use of air!! Do Not Wash!!

6) Apply small amount of Sure Orthe Light Bond Adhesive on bracket base. Adhesive should be added to one bracket at a time.

7) Press bracket to tooth. Final bracket adjustment must be made before. Adhesive begins to cure from the ambient light approximately 60 sec.).

8) Light cure entire bonded tooth surface for 20 seconds from two opposite directions. (Cure only for 10 seconds with high intensity lights.).

9) Keep teeth isolated for 3 min after last bond.

10) Arch wires may be placed 10 min. after last bond.

11) When bonding to Porcelain, the bonded Porcelain surface should be etched for 60 seconds with Porcelain Etch, rinsed, dried thoroughly and primed with a Porcelain Silane. Please follow the instructions in the Porcelain Fix kit available separately. After removing residual Silane with a vigorous blast of oil free air, continue with step 5.

12) When bonding to Amalgam, roughen amalgam surface with a diamond bur or with a Micro diamond bur or with a Micro Sealant.

Properties

Bonds metal and ceramic brackets to tooth surfaces.

Uses light cure adhesive technology to provide you with additional working time to ensure accurate bracket placement.

Small particle glass filled material designed specifically for orthodontic use that allows maximum penetration of filler into the finest screen mesh base.

Releases Fluoride.

Contains the adhesive promoter 4-Meta, for strong reliable chemical bonding with tooth, metal and porcelain surfaces.

Precautions

Refrigeration will increase viscosity, making syringing more difficult, and will retard setting time.

Contains polymerizable monomers which may cause allergic contact dermatitis in susceptible persons. Wash thoroughly with soap and water after contact. If skin sensitization occurs, or if known allergy to methacrylate resin exists, discontinue use.

Storage

Do not expose to temperature exceeding 24ºC/75ºF.

Do not expose to direct sunlight.

Refrigerate for maximum shelf life. Do not freeze.

Shelf life is 24 months from date of manufacture.